JOHNSON CONTROLS TUC0311 Terminal Unit Controller 230VAC

JOHNSON CONTROLS TUC0311 Terminal Unit Controller 230VAC

BRAND: Johnson Controls

MODEL: TUC0311

PART NUMBER: TUC0311-2 (code on the internal board label)

TYPE: Configurable Terminal Unit Controller, DIP-switch configurable without PC or software tool

SERIES: TUC03 / TUC03 Plus

SUPPLY VOLTAGE: 230 VAC +/-10%

FREQUENCY: 50/60 Hz

POWER CONSUMPTION: 12 VA (including the 24 VAC 7 VA actuator supply)

MAXIMUM INPUT CURRENT: 15 A (including I/Os)

ACTUATOR SUPPLY OUTPUT: 24 VAC +/-15%, 50/60 Hz, 7 VA

SENSOR SUPPLY OUTPUT: 5 VDC +/-10% 10 mA and 15 VDC +/-5% 30 mA for room sensor modules; 15 VDC +/-5% 20 mA for active sensors

ANALOG OUTPUT: 0-10 VDC

DIGITAL INPUTS: 4 (DI1 to DI4) plus variable-speed fan input VSF

TEMPERATURE INPUTS: 4 (T1 to T4)

OUTPUTS: Heating, cooling and 3-speed fan outputs (Htg, Clg, Fan, S, SP), occupancy LED output

COMMUNICATION: BACnet MS/TP (EIA-485), B-ASC BACnet Application Specific Controller; N2 Open compatible

NETWORK ADDRESSING: Set by on-board DIP-switch banks for Net, Config., Address and Room Mod.

APPLICATION: Direct digital control of terminal units with heating and/or cooling coils, electric heater and three-speed or variable-speed fan: fan coil units, close control units, unit ventilators, chilled or heated ceiling beams

OPERATING TEMPERATURE: 0 to 50 degC

OPERATING HUMIDITY: 10 to 90% RH non-condensing

STORAGE CONDITIONS: 20 to 70 degC, 10 to 95% RH non-condensing

WIRING CAPACITY: Max. 1 x 2.5 mm2 (24-12 AWG)

DIMENSIONS: 145 x 145 x 56 mm

DOCUMENTATION: TUC03 and TUC03 Plus Pack Sheet, Part No. A1638259PK Rev - dated 2023-06-28; TUC03 Plus Terminal Unit Controller Installation Guide, Part No. 24-85737-1552

APPROVALS: CE, WEEE (crossed-out wheeled bin) symbol

COUNTRY OF ORIGIN: Mexico

CONDITION: NEW - SURPLUS

QTY AVAILABLE: 4

REF: NTD036